Contents area

The new weather forecasting model for the Alpine region

Date of publication 31 March 2016
Topics Measurement & forecasting systems
Type Press release

Today, the Federal Office of Meteorology and Climatology MeteoSwiss puts the new high-resolution forecasting model COSMO-1 into operation, which runs on the supercomputer “Piz Kesch” operated by CSCS (Swiss National Supercomputing Centre). The grid spacing of this eight-times-a-day simulation is 1.1 km. This means double the resolution of the old forecasting model COSMO-2, in use since 2008 - an important improvement for the prediction of local weather events such as thunderstorms, thermal wind systems or the Foehn effect.

Accurate and reliable weather forecasts and warnings are essential for the public authorities, the economic sector and the private individuals in order (for them) to take weather-dependent decisions in timely manner, or to plan their outdoor activities. Especially in the Alpine region, a very high spatial resolution is required to accurately predict local weather events such as thunderstorms, thermally induced mountain and valley wind systems or the Foehn effect. The model COSMO-2 with a 2.2 km grid used by MeteoSwiss until now has been able to represent major Alpine valleys and orographic structures with an extension of at least 10 km. However, it was not always capable of simulating the development of storm clouds or wind conditions in small or medium-size valleys such as, for example, the Valle Maggia.

COSMO-1 in operation as from today

Today, following a six months long test period, MeteoSwiss puts COSMO-1into operation. The new forecasting model with a grid spacing of 1.1 km is an important improvement in the prediction of local weather phenomena in the Alpine region and is expected to produce more detailed regional forecasts and more accurate local warnings. As of now, even wind conditions in narrow valleys such as the Valle Maggia will be simulated with a high degree of precision.

COSMO-1 will be run every three hours for up to +33 hours into the future. For warnings concerning the following day, it will even run up to +45 hours ahead once daily. The operation of COSMO-2 will cease in autumn 2016.

New forecasting model is run on a new supercomputer

COSMO-1 requires 20 times the computing power of COSMO-2; it is therefore run on the new supercomputer “Piz Kesch”, which came into operation in September 2015 at the Swiss National Supercomputing Centre (CSCS) in Lugano. “Piz Kesch” was custom-built by MeteoSwiss in collaboration with CSCS, the Center for Climate Systems Modeling (C2SM) at the ETH Zurich, and the companies Cray and NVIDIA to fit the exact purposes of MeteoSwiss. Worldwide, MeteoSwiss is the first national meteorological service to opt for a new computer architecture for its operational forecasting models: by using graphic processors (GPUs) and a software which is optimised for GPUs, the supercomputer not only calculates simulations significantly faster but is also much more energy efficient, which allows for an increased computing capacity at same costs.

Weather forecasting today uses complex programmes, so-called numerical models, which simulate developments in the atmosphere based on numerical formulae.  MeteoSwiss uses the COSMO model, which has been developed in collaboration with the international Consortium for Small-scale Modeling (COSMO). The complex software codes have been upgraded in preparation for the switchover to a GPU-based computer system during the last five years. In this effort, MeteoSwiss collaborated closely with ETH Zurich researchers, C2SM and CSCS, under the umbrella of the HP2C (High Performance and High Productivity Computing) and PASC (Platform for Advanced Scientific Computing) initiatives. These were launched as part of the implementation of the National Strategic Plan for High-Performance Computing and Networking.


MeteoSwiss, Communication
+41 58 460 97 00

Further information